Tag Archives: emf protection

EMF Testing Indoor Air Quality Radon Gas Testing: 214.912.4691 Dallas – Houston – Austin – Fort Worth

Powerline Home Safe Distance Cell Phone RF Surveys

Cell Tower Site on High Voltage Power Line near homes in residential area in North Dallas – EMF Testing and Surveys

EMF Testing / Magnetic Field Survey & Safe Distance Measurement Services

EMF testing for those concerned about living near powerlines and feeders is available for commercial clients and limited residential with reports that range from verbal to complete reports with photo documentation and graphics. We also provide consultation on viable strategies and products for EMF protection. We travel all over Texas and cities in adjacent states including Dallas, Houston, Fort Worth, Austin, San Antonio and Oklahoma City.

RF (Radio Frequency) Scans and Evaluations – Maximum Permissible Exposure (MPE)

We test RF energy for frequency and amplitude in order to find sources and evaluate safety with respect to FCC regulatory, compliance and precautionary guidelines, and to determine potential interference issues between wireless routers, cell phone repeaters / boosters, Radio Frequency Identification (RFID) systems, and wireless microphone / audio / video data systems.

Magnetic / Electric / RF & EMF Shielding Consultations including proper grounding

If you have an issue with electromagnetic energy that is either a safety issue or causes equipment interference, we are fully qualified to assess, troubleshoot and make sound recommendations to fix or mitigate the situation.

Radon Gas Measurements & Surveys (Short / Long Term Testing)

With a background in radon and radiation safety, we are capable of evaluating and reporting on radon gas levels, how they compare with EPA standards and whether a mitigation solution is called for.

EMF Testing for Electrical Wiring Issues Indicated by Excessive EMF Fields

Whether you believe in the safety hazards of EMF or not, the most common source of high EMF fields inside the home is improper wiring which fails to conform to current NEC code. ScanTech can detect and direct repairs on electrical wiring that manifests as an abnormal magnetic field.

Preliminary Construction Surveys / Property Transfer Phase I Environmental Site Due Diligence Survey testing regarding Indoor Air Quality (IAQ) – EMF Consultation for Safety and potential EMI – Radon Testing for Multi-Family Dwellings and Commercial Buildings.

We are often called out to site before a structure or complex is erected in order to survey and communicate any possible issues and the potential impact of nearby power lines, substations, transformers, cell towers and other EMF/RF generating sources. We also make construction recommendations for minimizing electromagnetic field emissions for safety and electromagnetic Interference concerns with sensitive manufacturing and research equipment.

Indoor air quality testing for VOC levels regarding Certificate of Occupancy permits according to City of Dallas Green Ordinances. Also known as the 804.2 Post-Construction, Pre-Occupancy Baseline IAQ Testing which is a 4 hour test for 500 uG / m^3 or less of VOCs.

Magnetized & Radiation Contaminated Metals, Stone and Imported Products

ScanTech has been in the radiation survey business for over 10 years and is routinely called upon to investigate cases of suspected radioactive contamination and magnetized ferrous metals which can cause unusual issues. Our instrumentation includes several Geiger counters with capable of detecting Alpha and Beta particle emissions, X-Rays and includes specialized Gamma radiation scintillation detectors.

Weak Cell Phone Signal Reception Issues & Wireless LAN Problems / RFID Interference

Weak Cellular Phone (including 2G / 3G / 4G LTE) & Wireless Strength Measurements with consulting for correction / mitigation in commercial buildings, residential and multifamily properties with poor coverage, slow data rates and dropped calls for all major telecom and communications carriers including Sprint, T-Mobile, Verizon, AT&T for smartphones, tablets, iPads, etc. Radio Frequency Identification system troubleshooting and interference issues investigated. We also perform FCC RF Compliance surveys for MPE (Maximum Permissible Exposure) including rooftop antenna installations.

Implanted Biomedical Device EMF / EMI Measurement Compliance Surveys and Testing for Patient Safety

Medical Device Compliance Testing (Pacemakers, Implantable Defibrillators, ICD’s etc. – Medtronics, St. Jude Medical, Boston Scientific, Mortara) for individuals returning to work or home after implant surgery to identify potential hazards from AC/DC Magnetic and Electric Fields, Microwaves, RF and general EMI (Electromagnetic Interference).

Hospital Infant Anti-Abduction Security Systems

ScanTech troubleshoots RFID integrated systems designed to protect neonatal care facilities that employ systems such as Hugs by Stanley Healthcare and MyChild by McRoberts Security Technologies.

Electrostatic Discharge (ESD) Testing, Consulting And Evaluation for Commercial, Industrial and Biomedical Companies / Applications / Clients

We have the equipment to determine the sheet resistance of ESD flooring material and if anti-static grounding is working as well as the ability to identify troublesome materials and processes which can cause equipment malfunction and electric shock / fire / explosion hazards. We can also measure relative air ion counts, humidity and the direct DC static voltage on surfaces (positive or negative) up to 30,000 V to determine which objects in the environment may be damaging your static sensitive equipment.

Indoor Air Quality (IAQ) Surveys to Determine Relative Air Cleanliness PM2.5 / PM10 / HEPA Filtration Efficiency / Formaldehyde / VOC / CO2 (Carbon Dioxide) / O2 Oxygen % Concentration & Contamination for Commercial Building and Industrial / Occupational Atmosphere Evaluations with expertise in Nanotoxicology and Medical Environmental Illness Testing

We have time based datalogging air laser analysis available to characterize particulate matter such as small particle contaminants (down to 0.5 microns such as bacteria) and large particle counts (2.5 um and larger) for potential pollen, dust and mold detection which are also known as RSPs. (Respirable Suspended Particles) We can also check for formaldehyde concentrations and VOCs (Volatile Organic Compounds) levels from outgassing materials such as pressed wood flooring or glues and other binders.

Elevated CO2 (carbon dioxide) levels are indicative of Sick Building Syndrome and poor air exchange characteristics in a structure.

New nanomaterials on the market have raised concerns about the potential toxic effects of nanoparticles (such as carbon nanotubes, titanium dioxide, silver NPs, etc.) in particulate, aerosol, aqueous forms and their in-vivo effects.

Commercial, industrial, occupational health and limited residential applications.

http://www.indoorairqualitytestingdallas.com/

OSHA Sound / Noise Level Surveys for Safety Audits

Sound (Commercial) & Industrial Safety field surveys and measurement including for acoustic OSHA sound and STC (Sound Transmission Class) noise levels / ordinances / testing (meeting ANSI & IEC Type 2 standards) to determine compliance and evaluate potential issues with excessive or disruptive noise.

Photometric Glare & Illumination (Lighting Level) Surveys for Safety, OSHA and City Ordinance Compliance

Photometric mapping to identify poor / insufficient / excessive illumination, security camera glare, ATM lighting security assessments, ADA lighting requirements / compliance, and privacy. Many cities have enacted ordinances which limit the amount of light emanating at the property line at night in foot candles. (fc) We can also measure lighting flicker rates which can cause headaches and other performance issues as well as evaluate possible disruption of circadian rhythms which lead to insomnia and lack of restful REM sleep.

Metallurgical Analysis & Consulting

Materials analysis for ferrous / non-ferrous metals / alloys. Tools and tool steel quality evaluations for carbon content. Also magnetic / RF / electric shielding capability, corrosion resistance, heat resistance, degree of temper, quench methods, elasticity, weathering, and electrical quality consulting. Metamaterial composite research for nanotechnology, biomedical, and exotic applications. (graphene, nanoparticles, carbon nanotubes, nanodiamond, etc.) Radioactivity testing for scrap metal or other suspected products.

EMF Power Lines & Safe Distance for Protection – What is Wrong with this Picture?

Mark Twain once commented:

“Figures often beguile me,” he wrote, “particularly when I have the arranging of them myself; in which case the remark attributed to Disraeli would often apply with justice and force: ‘There are three kinds of lies: lies, damned lies, and statistics.”

So what is beguiling about this figure?

safe-living-distance-to-power-lines

Deceptive depiction of EMF fields from high voltage powerlines.

It gives greatly oversimplified answers to alleged effects based on solely on DISTANCE instead of actual ELECTRIC OR MAGNETIC FIELD STRENGTH. It is understandable that most clients and residential home owners want a simple formula or guideline to the question “How far or what distance from high voltage power lines is safe, or within safety levels for my family and I?”

Unfortunately, the answer isn’t that simple for the following reasons.

Because of the poor coupling between electric fields and the human body, even strong external AC electric fields have a vanishingly small effect on the voltages induced in the body compared to the bio-electric energies already present in the heart, brain and nervous system. Magnetic fields have a stronger potential for affecting the human organism, but the only parameter mentioned is the 765 kilo-volts present on the line which pertains to the electric field, not the magnetic component which would relate to current measured in amps.

There is also a fine nuance in the graphic itself that most people not familiar with electromagnetic theory would miss. The field is shown as radiating out from three different points on the tower in concentric circles. This is indicative of a magnetic field, not an electric field. The electric field comes straight out of the wire and that is based on voltage which is the only metric given. So the implication is that the main parameter for an electric field is given, but a magnetic field illustration is given by mistake instead.

Notice that certain critical information is lacking. There is no mention of any parameters that actually govern magnetic fields such as amperage, phasing or physical specifications of the tower. Furthermore, in my experience of measuring high voltage towers, I have never seen one that could influence ambient fields (EMFs) out to 2 kilometers (over a mile) with any conventional AC gaussmeter or electric field meter.

And with regard to the safety levels, what does the term “stunted growth” mean or apply to? Is it based on studies of children or even human beings? How is the term “stunted” even quantified? Is it 1%, 10% or 34.25%? Do certain effects such as abnormal EEGs actually begin (or end) at exactly 507 meters? This figure is presented without any form of context, explanation, references or other supporting data and very little clarity. This sort of anti-information only serves to distort known physical laws into a neat and convenient visual bite that gives the reader a false sense of knowledge.

The only concept the diagram illustrates to any degree is the idea that electromagnetic fields “fall off” or diminish with increasing distance, though it does that rather badly by not explicitly stating it. But notice what is so compelling about the graphic; it is attractive, neat and gives a tabulated numbers versus certain biological effects causality that urges a viewer to adopt it as accepted fact without argument.

To re-invoke the perennial wisdom of Twain:

It ain’t so much what we know that gets us into trouble. It’s what we know that just ain’t so.

Then this sort of pseudo-scientific mythology gets incorporated into the bylaws of how EMF works (such as proliferating on the Internet) and only dilutes the cause of actual knowledge by displacing it with misdirected garbage which is worse than useless.

I have sat in on numerous high level PhD thesis defenses and if the presenter had used a slide like this, I guarantee they would be discredited on the spot for the aforementioned reasons. But without peer review or challenge, there are some who think they can become an authority on a complex subject merely by skimming some articles found online.

A phrase found in Nature (one of the most highly respected scientific journals known) in 1885, page 74 Nov 26, 1885 exemplifies this phenomena:

“A well-known lawyer, now a judge, once grouped witnesses into three classes: simple liars, damned liars, and experts.

More information can be found here:  http://scantech7.com/EMF_Survey_FAQ.htm

Epidemiology of EMF: The Science of Cancer Risk and EMF / RF Safety Levels

Epidemiology, or the study of disease patterns as they relate to a particular health hazard or set of potentially harmful hazards as applied to a range of biological effects, is a complex field in it’s own right.

When studying the epidemiology of EMF & RF fields as they apply to the incidence of childhood leukemia, brain cancer, Alzheimer’s and other dread conditions, it becomes even more complicated and controversial for a variety of reasons.

As a part of my ongoing consulting research with regard to the health impact of power lines and EMF, I continue studying epidemiology, biology, medical geology, probability and statistics in conjunction with and in the context of my electrical / biomedical engineering education and considerable technical experience in order to structure and ask the relevant questions to this topic.

So why is it so difficult to get a straight answer about whether EMF or RF radiation is harmful? And why can no one agree upon a set of EMF safety levels?

1) EMF and RF does not come in one simple flavor or dose like a known chemical or ionizing carcinogen / hazardous material does. For instance, benzene is a scientifically acknowledged carcinogen whose effects have been well studied, documented and most of all REPRODUCIBLE. Benzene comes in only one form, one structural formula of C6H6 with an aromatic ring structure. The amount presented to a test subject is a simple measure of volume vs. the mass of the test subject.

Not so for EMF as it can present at a variety of frequencies, waveform shapes, amplitudes and time weighted exposure levels. It is easy to feed a lab rat 1 gram of benzene a day to see the effects. You can subject it to an ionizing UV light at a specific frequency for a given amount of time. But because of the constant electromagnetic fluctuations that a human is subjected to in suburban / urban activities throughout a daily routine, you do not have a firm control over the independent EMF variable like you would with benzene or UV light.

It is essentially inhumane and technically impractical to keep a single person, let alone a number of control subjects substantial enough to warrant a valid study on EMF effects in a completely homogeneous magnetic or RF field for the length of time required to see any possible effects.

2) Which leads to the next issue:

A “zero EMF exposure” control group with which to compare to an “exposed group” virtually does not exist in our culture. So how do you make a true comparison between groups as in a valid epidemiological study? As one famous epidemiologist once pointed out, if everyone smoked, then lung cancer would be considered a genetic disease, not an environmental one.

3) Time lag between exposure and actual disease manifestation. Even with some carcinogenic habits like tobacco smoking, years or even decades can elapse between the event and any serious health effects depending on what you smoke, how often and genetic predispositions.

How do you keep a person in a uniform 1, 5 or 10 milliGauss field for that length of time? The cost involved would be enormous and it would essentially be a prison. Then you have to look at diet, the quality of air and water, and the probable lack of exercise given the confined space this would dictate.

So a true epidemiological study in the strictest tradition is virtually out of the question.

4) Even if you do see some apparent effect, how do you know it is the EMF and now some other agent that is responsible? Correlation is not causation, so if there is a true link between the electromagnetic fields from power lines and cancer, it is important to identify and understand the actual metabolic pathways and mechanisms by which this operates.

What if areas of greater EMF exposure happen to correlate with higher urban density? (which tends to be true as a higher population density also means that more electricity / current is used which will tend to produce higher magnetic fields) But is it the magnetic fields that are responsible, or the stress, pollution and other factors that come with inner city living?

5) And let’s say there is a correlation between exposure to EMF and RF fields and some health effects; (which I suspect there is at least something to it) at what level and for how long is this necessary for it to even be apparent within your lifetime? How does it compare with other risk factors that you might be more susceptible to?

I am not here to minimize concerns, but I will point out that there are a lot of environmental factors to consider when it comes to health (radon gas or indoor air quality for instance) and you should prioritize them in order of which is most likely to affect you.

6) It is a politically charged subject.

If exposure to EMF is indeed a major health issue, then this opens utility and power companies up to litigation which is impractical for the normal functioning of our modernized society. For what it is worth, they will never admit if it is a problem or not and for understandable reasons. They are in the power generation business, and they already have a lot of policies, procedures and regulations regarding the safe production and distribution of electricity. Electricity is potentially dangerous to their employees and customers, so they already have plenty to worry about in terms of conducted power, let alone radiated fields. Also, their strength is in power engineering and infrastructure, not playing doctor, or being bio-electromagnetic experts.

And for those who say the power and utility companies try to hide the truth about the effects of EMF to protect their bottom line, I will point to the opposite side of the spectrum where there are individuals who make a living by scamming and scaring the crap out of people by inventing / exaggerating concerns, amplifying fear and then selling some solution or gadget which does nothing but drain your wallets. The reason I consider this dangerous is because the misdirection of attention and distorting risk has the potential to create tunnel vision, and leaves people open to being blindsided by the real and present dangers that already exist.

Also, there are some electropollution extremists that have such ridiculously stringent standards for protection from EMF levels that they would essentially insist on society living in the dark ages without the electrical and communications infrastructure that contributes in many ways to our comfort and safety. What about the importance of lighting, 911 access, air conditioning and modern research and medical facilities? Or is the very real and measurable mortality rate of populations who live in 3rd World conditions where infectious disease and lack of potable water cause widespread death, shortened lifespans and a high infant / child mortality rate more desirable?

A large part of the problem is the lack of understanding about how electricity and electromagnetism works along with incomplete knowledge about basic biological processes.

Even modern biophysics does not have all of the answers about DNA replication, protein synthesis, etc. so this is not a criticism, just the fact that most people do not or cannot invest the time necessary to learn about these subjects (and keep up with current research) in enough detail enough to make an informed opinion / decision.

But I do, and my education is forever continuous because I believe in the right of a client to be able to have access to enough information to make a decision they can live with comfortably. Also, I want to get to the truth myself as I find the subject matter fascinating, and it leads me along a valuable process of discovery.

I hope these postings help to dispel the mythologies and ignorance which pervades the subjects of how our environment can or could influence the function of the human body.

What people typically know about electricity is that it is everywhere, the effects of lighting and powering motors can be seen, and it is absolutely lethal or dangerous if you do contact a sufficient voltage / amperage to stop your heart or cause other bodily harm.

Everyone knows that you should not climb a transmission tower and touch a wire, so there is already a built in fear or at least respect for what a sufficient amount of electrical power can do to your body. This association I feel is responsible for why so many people have a primal response which varies from uneasy to negative when observing an imposing 238 kilo-Volt primary feeder with tall metal towers looming over their backyard.